1684-5H
Chicago® Grip with Latch 0.37-Inch Cable
- Hot-line grips for steel stranded cable
- Grip may be placed on wire with hot-line stick
- When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
- Standard hot-line grips are not supplied with springs or lock-open features
- Made in USA
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). Hot-line grips for both bare and insulated conductors. Grip may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire. Standard hot-line grips are not supplied with springs or lock-open features.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Overall Length (Inch):
14.75
Overall Length (cm):
37.5
Overall Height (Inch):
8.63
Overall Height (cm):
21.9
Overall Width (Inch):
2.38
Overall Width (cm):
6
Material:
Steel
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
Yes
Swing Latch:
No
Spring:
No
Locking Handle:
Yes
Jaw Type:
Double V
Teeth Type:
Smooth
Jaw Length (Inch):
5
Jaw Length (cm):
12.7
Maximum Safe Load (lb):
8000
Maximum Safe Load (kg):
3628.7
Weight (lb):
6.5
Weight (kg):
2.9
UPC:
092644471674
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
